NSN 16452-5

A resilient metal item, circular or nearly circular, which is designed to be inserted into an internal or external groove and retained by its own spring action, or it may have external prongs or projections designed to be inserted into a hole and retained by spring action of the prongs which grip by imbedding into the material. For items having internal prongs which perform the same function, see push on nut. It is used to keep and/or lock a part(s) in position, as a ball bearing on a shaft or in a housing. See also clip, retaining and pin, lock. Excludes:ring, connecting, round.

0.200 inches minimum and 0.230 inches maximum body height, unable to decode dc resistance rating in ohms, unable to decode core construction, unable to decode coil form type, unable to decode inductance rating.

NSN 5950-01-084-0632 Datasheet

(NSN) National Stock Number

5950-01-084-0632

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-084-0632

Requires Demilitarization

Yes

(INC) Item Name Code

06338

Date

Mon, Oct 8, 1979

Schedule B Code

8504500000

Body Height

0.200 inches minimum and 0.230 inches maximum

Coil Form Type

unable to decode

Core Construction

unable to decode

Dc Resistance Rating In Ohms

unable to decode

Inductance Rating

unable to decode

Inclosure Type

fully inclosed

Maximum Operating Temp

125.0 celsius

Mounting Method

unable to decode

Overall Length

0.190 inches minimum and 0.210 inches maximum

Overall Width

0.090 inches minimum and 0.110 inches maximum

Quality Factor

unable to decode

Rating Method

unable to decode

Reliability Indicator

not established

Specification/Standard Data

96906-ms21422 government standard

Terminal Type And Quantity

2 wire lead

Test Data Document

"81349-mil-c-15305 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Winding Conductor Size

unable to decode

Winding Operating Current

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006338

Cross Reference

CAGE Codes

07388

Torotel, Inc. Div Torotel Products, Inc.

U.s./canadian manufacturers

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

97942

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems

U.s./canadian manufacturers

71279

Interconnection Products Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34700

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061980

Schedule B & Trade

Schedule B

8504-50-0000

Description

inductors, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77125

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-01-084-0632?

   The FSCG of the NSN 5950-01-084-0632 is 5950

2. Does the NSN 5950-01-084-0632 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504500000

3. Does NSN 5950-01-084-0632 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-084-0632 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-01-084-0632 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-084-0632 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Mon, Oct 8, 1979