NSN 165040-1

A component which converts available alternating current or direct current electrical power into a form required to operate another component or set. The item may consist of a combination of an invertor,vibrator; vibrator,interrupter; vibrator,self-rectifying; invertor,power,static with a transformer and rectifies employing electron tubes, semiconductor diode or metallic (dry disc) type components, or the synchronized secondary contacts of a vibrator,self-rectifying or may consist of electron tubes, semiconductor diode or metallic (dry disc) type rectifiers and capacitors in transformerless (alternating current-direct current type) circuits which may be of the voltage-multiplier type. The item may incorporate a filter,direct current power and provisions for regulation of input and/or output voltage. The item may have special input, output, control or other facilities for applications in specialized environments such as medical, dental or other operations. Excludes battery chargers and rotating machinery types of items, such as motor generators and enerators and dynamotors.

magnetic blowout arc quenching method, multipole-single actuator type body style, at pole two actuator position designation, 1.495 inches nominal body length, trip-reset actuator function.

NSN 5925-00-902-1883 Datasheet

(NSN) National Stock Number

5925-00-902-1883

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-902-1883

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Fri, Jan 1, 1960

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole two

Arc Quenching Method

magnetic blowout

Body Length

1.495 inches nominal

Body Style

multipole-single actuator type

Body Width

1.872 inches nominal

Bushing Length

0.375 inches nominal

Center To Center Distance Between Terminals Parallel To Length

0.875 inches nominal

Center To Center Distance Between Terminals Parallel To Width

0.625 inches nominal

Circuit Protection Type

overcurrent all locations

Fragility Factor

moderately rugged

Frequency In Hertz

400.0 all locations

Inclosure Protection Type For Which Designed

hermetically sealed

Internal Trip Release Configuration

series trip all locations

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Maximum Continuous Load Current Rating Per Pole

12.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

500.0 ac all locations

Mounting Facility Type And Quantity

1 threaded bushing with panel seal

Mounting Surface To Terminal End Distance

1.678 inches nominal

Nominal Thread Size

0.375 inches

Operating Voltage Type And Rating Per Pole In Volts

115.0 ac all locations

Pole Quantity

3

Reset Method

manual

Special Handling Feature

magnetic

Storage Type

general purpose warehouse

Terminal Type And Quantity

6 wire hook

Thread Pitch Diameters

+0.3503 to 0.3537 inches

Thread Quantity Per Inch

32

Thread Series Designator

unef

Trip Release Characteristic

time delay all locations

Trip Release Method

magnetic-hydraulic all locations

Trip Delay Time In Seconds Per Rated Continuous Current

0.160 minimum at 200 pct and 0.600 maximum at 200 pct all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

150.0 all locations

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

37695

Raytheon Company

U.s./canadian manufacturers

81541

Sensata Technologies Maryland, Inc

Non-manufacturers

74193

Eaton Corp Heinemann Products Commercial Controls Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-00-902-1883?

   The FSCG of the NSN 5925-00-902-1883 is 5925

2. Does the NSN 5925-00-902-1883 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-00-902-1883 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-902-1883 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-00-902-1883 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-902-1883 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960