NSN 16DP4153

A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.

w/o mtg facilities terminal(s) on one surface body style, 0.562 inches maximum body height, 15000.000 picofarads single section capacitance value per section, 0.844 inches maximum body width, 1.344 inches maximum body length.

NSN 5910-00-005-3101 Datasheet

(NSN) National Stock Number

5910-00-005-3101

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-005-3101

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Sun, Jun 11, 1972

Schedule B Code

8532250080

Tolerance Range Per Section

-10 / +10 percent single section

Body Style

Wtihout mounting facilities terminal(s) on one surface

Reliability Indicator

Not established

Terminal Length

1.625 inches minimum

Body Height

0.562 inches maximum

Body Length

1.344 inches maximum

Schematic Diagram Designator

No common or grounded electrode(s)

Center To Center Distance Between Terminals Parallel To Length

0.813 inches minimum and 0.875 inches maximum

Body Width

0.844 inches maximum

Insulation Resistance At Maximum Operating Temp

75 megohms

Capacitance Value Per Section

15000 picofarads single section

Nonderated Operating Temp

-55 degree celsius minimum and 125 degree celsius maximum

Nonderated Continuous Voltage Rating and Type Per Section

1600 dc single section

Insulation Resistance At Reference Temp

50000 megohms

Terminal Surface Treatment

Solder

Case Material

Plastic

Power Factor At Reference Temp In Percent

1

Dielectric Material

Plastic

Terminal Type and Quantity

2 uninsulated wire lead

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

72136

Electro Motive Corp Subsidiary of International Electronics Corp

U.s./canadian manufacturers

84171

Rheinlander, Robert M

Non-manufacturers

02799

Arco Electronics Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-005-3101?

   The FSCG of the NSN 5910-00-005-3101 is 5910

2. Does the NSN 5910-00-005-3101 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-005-3101 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-005-3101 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-005-3101 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-005-3101 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Sun, Jun 11, 1972