NSN 16W282-13

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

f-16 aircraft mission design series.

NSN 1560-01-265-8450 Datasheet

(NSN) National Stock Number

1560-01-265-8450

(FSG) Federal Supply Group

15 - Aerospace Craft and Structural Components

(FSC) Federal Supply Classification

1560 - Airframe Structural Components

(NIIN) National Item Identification Number

01-265-8450

Requires Demilitarization

Yes

(INC) Item Name Code

32243

Date

Sat, Oct 17, 1987

Schedule B Code

8807909060

Aircraft Mission Design Series

f-16

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032243

Cross Reference

CAGE Codes

81755

Lockheed Martin Corporation Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

56333

Continental Forge Company, Llc Dba Continental Forge Co

U.s./canadian manufacturers

T0544

Tusas - Turk Havacilik Ve Uzay Sanayii Anonim Sirketi

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

D - 200.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

04705

Water Commodity

671 - Aircraft parts, to include test/tool sets and equipment (other than armament systems)

National Motor Freight Classification Item Number

011760

Schedule B & Trade

Schedule B

8807-90-9060

Description

other parts, nesoi, for use in other military aircraft, spacecraft and spacecraft launch vehicles (excluding parts of communication satellites)

End Use

50070 - Parts for military-type goods

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

79297

(NAICS) North American Industrial Classification System

336419

Questions & Answers

1. What is the FSCG of the NSN 1560-01-265-8450?

   The FSCG of the NSN 1560-01-265-8450 is 1560

2. Does the NSN 1560-01-265-8450 have a Schedule B code assigned?

   Yes, the Schedule B code is 8807909060

3. Does NSN 1560-01-265-8450 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 1560-01-265-8450 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 1560-01-265-8450 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 1560-01-265-8450 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Sat, Oct 17, 1987