NSN 170-994

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

included inclosure, watertight environmental protection, 60.0 hertz nominal frequency rating, 2.937 inches nominal center to center distance between mounting holes, vibrating action type.

NSN 6350-00-044-1916 Datasheet

(NSN) National Stock Number

6350-00-044-1916

(FSG) Federal Supply Group

63 - Alarm, Signal and Security Detection Systems

(FSC) Federal Supply Classification

6350 - Security Detection Systems, Signal and Miscellaneous Alarm

(NIIN) National Item Identification Number

00-044-1916

Requires Demilitarization

Yes

(INC) Item Name Code

14633

Date

Fri, May 24, 1968

Schedule B Code

8531900002

Action Type

vibrating

Center To Center Distance Between Mounting Holes

2.937 inches nominal

Environmental Protection

watertight

Frequency Rating

60.0 hertz nominal

Inclosure

included

Material

aluminum

Mounting Hole Diameter

0.144 inches nominal

Mounting Hole Quantity

2

Mounting Method

bulkhead

Overall Height

0.975 inches nominal

Overall Length

3.281 inches nominal

Overall Width

1.605 inches nominal

Special Features

68 decibles at 3 ft aczb

Surface Treatment

paint

Voltage In Volts And Current Type

28.0 dc

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0014633

Cross Reference

CAGE Codes

98705

Modern Bond Corp

U.s./canadian manufacturers

90073

Cmc Electronics Inc

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

52340

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

012530

Schedule B & Trade

Schedule B

8531-90-0002

Description

parts of electric sound or visual signaling apparatus other than printed circuit assemblies, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77885

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 6350-00-044-1916?

   The FSCG of the NSN 6350-00-044-1916 is 6350

2. Does the NSN 6350-00-044-1916 have a Schedule B code assigned?

   Yes, the Schedule B code is 8531900002

3. Does NSN 6350-00-044-1916 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6350-00-044-1916 contain precious materials?

   Precious metal content is unknown

5. Does NSN 6350-00-044-1916 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6350-00-044-1916 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Fri, May 24, 1968