NSN 17B2E2000

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode material, conduit assembly,flexible-elect part name assigned by controlling agency, c-17a acft nha 17b2e2000-515 end item identification, 0.595 inches minimum body inside diameter, 0.800 inches maximum body outside diameter.

NSN 5975-01-491-0028 Datasheet

(NSN) National Stock Number

5975-01-491-0028

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

01-491-0028

Requires Demilitarization

Yes

(INC) Item Name Code

00354

Date

Tue, Oct 9, 2001

Schedule B Code

8547900020

End Item Identification

c-17a acft nha 17b2e2000-515

Body Inside Diameter

0.595 inches minimum

Body Outside Diameter

0.800 inches maximum

Part Name Assigned By Controlling Agency

conduit assembly,flexible-elect

Material

unable to decode

Measuring Method And Length

17.190 inches minimum excluding end fittings and 17.550 inches maximum excluding end fittings

Special Features

body has cres wire braid cover

Terminal End Type

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000354

Cross Reference

CAGE Codes

88277

The Boeing Company

U.s./canadian manufacturers

30463

Dcx-Chol Enterprises, Inc.

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8547-90-0020

Description

electrical conduit tubing lined with insulation

End Use

20005 - Electric apparatus

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

77329

(NAICS) North American Industrial Classification System

335932

Questions & Answers

1. What is the FSCG of the NSN 5975-01-491-0028?

   The FSCG of the NSN 5975-01-491-0028 is 5975

2. Does the NSN 5975-01-491-0028 have a Schedule B code assigned?

   Yes, the Schedule B code is 8547900020

3. Does NSN 5975-01-491-0028 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-01-491-0028 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-01-491-0028 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-01-491-0028 was assigned to the Federal Catalog?

   It was assigned 24 years ago, on Tue, Oct 9, 2001