NSN 18-1918-2-A4N-1

"a device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes:circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller."

5.0 amperes resistive load and 2.0 amperes inductive load ac at sea level contact load current rating, 115.0 ac at sea level contact voltage rating in volts, breaks before makes each section rear contact switching action, 28.0 dc at sea level contact voltage rating in volts, 3.0 amperes resistive load and 1.0 amperes inductive load dc at sea level contact load current rating.

NSN 5930-00-059-3011 Datasheet

(NSN) National Stock Number

5930-00-059-3011

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-059-3011

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jun 6, 1967

Schedule B Code

8536509020

Contact Load Current Rating

3.0 amperes resistive load and 1.0 amperes inductive load dc at sea level

Contact Load Current Rating

5.0 amperes resistive load and 2.0 amperes inductive load ac at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

First Flat Length

0.250 inches nominal single actuator

Flat Height

0.210 inches nominal single actuator

Hazardous Locations/Environmental Protection

explosion proof

Individual Section Quantity

2

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Type

slotted bushing at 12:00 oclock

Operating Temp Range

-65.0 to 125.0 celsius

Overall Diameter

1.172 inches maximum

Overall Length

2.146 inches nominal

Pole Quantity

2 each section front

Rotor Through Connection Quantity

1 each section

Shaft Diameter

0.250 inches nominal single actuator

Shaft Flat/Slot Angular Location

180.0 degrees from nonturn device single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.780 inches nominal single actuator

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

4 single actuator

Switch Actuator Positioning Increment

36.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.410 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

4 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

91812

Janco Corporation Dba Janco Corp Div Mason Controls

U.s./canadian manufacturers

12464

Mcdonnell Douglas Corp Mcdonnell Douglas Electronic Systems Co

U.s./canadian manufacturers

81073

Grayhill Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-059-3011?

   The FSCG of the NSN 5930-00-059-3011 is 5930

2. Does the NSN 5930-00-059-3011 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-059-3011 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-059-3011 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-059-3011 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-059-3011 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Tue, Jun 6, 1967