NSN 1810280

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode core construction, tinned wire leads features provided, 0.056 inches minimum and 0.216 inches maximum body outside diameter, 0.374 inches minimum and 0.414 inches maximum body length, unable to decode coil form type.

NSN 5950-01-159-5785 Datasheet

(NSN) National Stock Number

5950-01-159-5785

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-159-5785

Requires Demilitarization

Yes

(INC) Item Name Code

06338

Date

Wed, Aug 10, 1983

Schedule B Code

8504500000

Body Length

0.374 inches minimum and 0.414 inches maximum

Body Outside Diameter

0.056 inches minimum and 0.216 inches maximum

Coil Form Type

unable to decode

Core Construction

unable to decode

Features Provided

tinned wire leads

Inclosure Type

open

Maximum Operating Temp

125.0 celsius

Mounting Method

unable to decode

Rating Method

unable to decode

Reliability Indicator

not established

Specification/Standard Data

49671-2387097 manufacturers specification control

Terminal Type And Quantity

2 wire lead

Turn Quantity

unable to decode

Winding Conductor Size

unable to decode

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006338

Cross Reference

CAGE Codes

31740

""leightner Electronics, Inc." Dba Leightner Electronics Inc"

U.s./canadian manufacturers

A486G

Nimikkeistokeskus Ncb Finland

Government departments or units, including military organizations

91417

L3harris Technologies, Inc.

U.s./canadian manufacturers

42161

Cxr Larus Corporation Div Cxr Telcom

U.s./canadian manufacturers

03956

Northrop Grumman Systems Corporation

U.s./canadian manufacturers

16331

Lockheed Martin Corporation Div Rotary and Mission Systems

U.s./canadian manufacturers

49671

Lockheed Martin Corporation Dba Lockheed Martin Div Lockheed Martin

U.s./canadian manufacturers

1VPW8

General Dynamics Mission Systems, Inc. Dba Gdms

U.s./canadian manufacturers

94990

Motorola Inc. Dba Integrated Information Systems Group

U.s./canadian manufacturers

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

037Z3

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (drawings)

Government departments or units, including military organizations

0EUG1

Vishay Hirel Systems Llc Div Dover Division

Non-manufacturers

0LHD8

Gfs Inc

U.s./canadian manufacturers

14304

L3harris Technologies, Inc. Dba Harris Corp Div Harris Defense Communications

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

80131

Electronic Industries Association

U.s./canadian manufacturers

09969

Vishay Dale Electronics, Inc.

U.s./canadian manufacturers

33875

Raytheon E-Systems, Inc

U.s./canadian manufacturers

3RPM9

Ernst Contracting

Non-manufacturers

02114

Amperex Electronic Corp Ferroxcube Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34700

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061980

Schedule B & Trade

Schedule B

8504-50-0000

Description

inductors, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77125

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-01-159-5785?

   The FSCG of the NSN 5950-01-159-5785 is 5950

2. Does the NSN 5950-01-159-5785 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504500000

3. Does NSN 5950-01-159-5785 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5950-01-159-5785 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-01-159-5785 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-159-5785 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Wed, Aug 10, 1983