NSN 19115400

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

cylindrical shaped capacitor; 0.159 in. body lg; 0.098 in. body dia; two axial wire lead terminals 1.150 in. lg and 0.019 in. dia; 50 vdc general characteristics item description.

NSN 5910-01-080-9931 Datasheet

(NSN) National Stock Number

5910-01-080-9931

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-080-9931

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, Aug 7, 1979

General Characteristics Item Description

cylindrical shaped capacitor; 0.159 in. body lg; 0.098 in. body dia; two axial wire lead terminals 1.150 in. lg and 0.019 in. dia; 50 vdc

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1104867

Cross Reference

CAGE Codes

34010

Control Data Systems Inc Contracts Dept

U.s./canadian manufacturers

59661

Syntegra / Usa/ Inc Computer Parts and Supplies Arh205

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Questions & Answers

1. What is the FSCG of the NSN 5910-01-080-9931?

   The FSCG of the NSN 5910-01-080-9931 is 5910

2. Does NSN 5910-01-080-9931 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5910-01-080-9931 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5910-01-080-9931 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5910-01-080-9931 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Tue, Aug 7, 1979