NSN 1A145094

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

2.500 inches nominal inside diameter, 3.125 inches nominal outside diameter, 0.313 inches nominal overall thickness.

NSN 5365-00-239-8399 Datasheet

(NSN) National Stock Number

5365-00-239-8399

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5365 - Bushings, Rings, Shims and Spacers

(NIIN) National Item Identification Number

00-239-8399

Requires Demilitarization

Yes

(INC) Item Name Code

24307

Date

Sun, Jan 1, 1961

Inside Diameter

2.500 inches nominal

Outside Diameter

3.125 inches nominal

Overall Thickness

0.313 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0024307

Cross Reference

CAGE Codes

64104

Dresser, Llc

U.s./canadian manufacturers

71995

Dresser Industries Inc Waukesha Engine Div

U.s./canadian manufacturers

23382

Fwd Seagrave Holdings Lp

U.s./canadian manufacturers

72386

Felters Co the

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

194120

Questions & Answers

1. What is the FSCG of the NSN 5365-00-239-8399?

   The FSCG of the NSN 5365-00-239-8399 is 5365

2. Does NSN 5365-00-239-8399 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5365-00-239-8399 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5365-00-239-8399 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5365-00-239-8399 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961