NSN 1C1232

An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). Excludes:terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. For items having printed electrical conductor paths, see printed wiring board.

sae gr 5 assn std single material response overall material document and classification, 23.0 rockwell c minimum and 32.0 rockwell c maximum overall hardness rating, hexagon head style, 0.455 inches minimum and 0.483 inches maximum head height, 1.938 inches minimum and 2.000 inches maximum fastener length.

NSN 5305-00-939-9204 Datasheet

(NSN) National Stock Number

5305-00-939-9204

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

00-939-9204

Requires Demilitarization

Yes

(INC) Item Name Code

18257

Date

Tue, Nov 30, 1965

Schedule B Code

7318152000

Fastener Length

1.938 inches minimum and 2.000 inches maximum

Hardness Rating

23.0 rockwell c minimum and 32.0 rockwell c maximum overall

Head Height

0.455 inches minimum and 0.483 inches maximum

Head Style

hexagon

Material Document And Classification

sae gr 5 assn std single material response overall

Material

steel overall

Minimum Tensile Strength

120000 pounds per square inch

Minimum Yield Strength

85 pounds per square inch

Nominal Thread Diameter

0.750 inches

Surface Treatment Document And Classification

sae/ams qq-p-416 ty2cl3 assn std single treatment response overall

Surface Treatment

Thread Class

2a

Thread Direction

right-hand

Thread Length

2.000 inches maximum

Thread Quantity Per Inch

10

Thread Series Designator

unified national coarse (unc)

Width Between Flats

1.100 inches minimum and 1.125 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0018257

Cross Reference

CAGE Codes

75755

Deere & Company Dba Deere John Co

U.s./canadian manufacturers

12603

Clark Equipment Co

U.s./canadian manufacturers

H0001

Daf Trucks N.v.

Non-us manufacturer (nato), other foreign organization or codification bureaus

0W357

Pdi Ground Support Systems, Inc.

U.s./canadian manufacturers

SCY13

E.c.a Etablissement Centrald'approvisionnement des Forces Armee

Military standards and standards organizations (ex:stanags,milspecs,defstans)

95097

Little Giant Crane and Shovel Inc

U.s./canadian manufacturers

80204

American National Standards Institute Incorporated Dba American National Standards Institute

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

05047

The American Society of Mechanical Engineers

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

80244

General Services Administration Federal Supply Service

U.s./canadian manufacturers

34623

Am General Llc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

44218

Norwalk Compreseer Company Inc Dba Norwalk Compressor Company

U.s./canadian manufacturers

73277

Houghton International Inc.

U.s./canadian manufacturers

0EAK3

Gse Management Co

Non-manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

48950

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

093486

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5305-00-939-9204?

   The FSCG of the NSN 5305-00-939-9204 is 5305

2. Does the NSN 5305-00-939-9204 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5305-00-939-9204 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5305-00-939-9204 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5305-00-939-9204 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5305-00-939-9204 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Tue, Nov 30, 1965