NSN 1MC2

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

black plastic dipped body with steel piston,moisture sealed;4 electric leads 10.000 in.lg,1 lead black,1 lead green,1 lead red,1 lead white;3.280 in.body lg;3.810 in.closed lg;5.125 in.extended lg;0.312 in.piston dia;piston end has 0.562-18 unf 2a,rh mtg thd;other end of switch has one centered unthd hole;0.190 in.hole dia;center of hole 0.250 in.from end of switch general characteristics item description.

NSN 5930-00-491-5186 Datasheet

(NSN) National Stock Number

5930-00-491-5186

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-491-5186

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Fri, Jun 6, 1969

General Characteristics Item Description

black plastic dipped body with steel piston,moisture sealed;4 electric leads 10.000 in.lg,1 lead black,1 lead green,1 lead red,1 lead white;3.280 in.body lg;3.810 in.closed lg;5.125 in.extended lg;0.312 in.piston dia;piston end has 0.562-18 unf 2a,rh mtg thd;other end of switch has one centered unthd hole;0.190 in.hole dia;center of hole 0.250 in.from end of switch

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1599607

Cross Reference

CAGE Codes

45152

Oshkosh Corp

U.s./canadian manufacturers

75Q65

Oshkosh Defense Llc

U.s./canadian manufacturers

41625

Incom Intl Inc Morse Controls Div

U.s./canadian manufacturers

62809

Marine Acquisition (us) Incorporated Div Prime Line Industrial Controls

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

586 - Vehicle parts, other than automobile

National Motor Freight Classification Item Number

061360

Questions & Answers

1. What is the FSCG of the NSN 5930-00-491-5186?

   The FSCG of the NSN 5930-00-491-5186 is 5930

2. Does NSN 5930-00-491-5186 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5930-00-491-5186 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5930-00-491-5186 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5930-00-491-5186 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Fri, Jun 6, 1969