NSN 1PC503F

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.050 microfarads single section capacitance value per section, 0.344 inches maximum body diameter, 0.875 inches maximum body length, 0.407 inches minimum and 0.469 inches maximum center to center distance between terminals parallel to length, w/o mtg facilities, axial terminals body style.

NSN 5910-01-144-0353 Datasheet

(NSN) National Stock Number

5910-01-144-0353

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-144-0353

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Mon, Dec 13, 1982

Schedule B Code

8532250080

Body Diameter

0.344 inches maximum

Body Length

0.875 inches maximum

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

0.050 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

0.407 inches minimum and 0.469 inches maximum

Dissipation Factor At Reference Temp In Percent

1.000

Dielectric Material

plastic polyethylene terephthalate (pet)

Internal Electrical Connection Type

extended foil

Insulation Resistance At Reference Temp

80000.0 megohms

Material

plastic case

Nonderated Operating Temp

85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

100.0 dc single section

Power Factor At Reference Temp In Percent

1.000

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.032 inches nominal

Terminal Length

1.625 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

84171

Rheinlander, Robert M

Non-manufacturers

19397

Bae Systems Information & Electronic Systems Integration Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-144-0353?

   The FSCG of the NSN 5910-01-144-0353 is 5910

2. Does the NSN 5910-01-144-0353 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-01-144-0353 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-144-0353 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-144-0353 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-144-0353 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Mon, Dec 13, 1982