NSN 1SC375

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

fuse block part name assigned by controlling agency, inverter, power conv; rectifier, power conv; nssn class submarine electric bow plane power conversion drawer a and d end item identification, block fuse; 3/8 stud; 1000v; 800amp special features.

NSN 5920-01-593-7397 Datasheet

(NSN) National Stock Number

5920-01-593-7397

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

01-593-7397

Requires Demilitarization

Yes

(INC) Item Name Code

28908

Date

Thu, Apr 14, 2011

Schedule B Code

8548900100

End Item Identification

inverter, power conv; rectifier, power conv; nssn class submarine electric bow plane power conversion drawer a and d

Part Name Assigned By Controlling Agency

fuse block

Special Features

block fuse; 3/8 stud; 1000v; 800amp

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0028908

Cross Reference

CAGE Codes

71424

Mersen Usa Ep Corp. Dba Ferraz Shawmut

U.s./canadian manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

96169

Electric Boat Corporation Div General Dynamics Electric Boat

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Questions & Answers

1. What is the FSCG of the NSN 5920-01-593-7397?

   The FSCG of the NSN 5920-01-593-7397 is 5920

2. Does the NSN 5920-01-593-7397 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5920-01-593-7397 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5920-01-593-7397 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5920-01-593-7397 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5920-01-593-7397 was assigned to the Federal Catalog?

   It was assigned 15 years ago, on Thu, Apr 14, 2011