NSN 2-13747-3

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

internal thread, solid end style designator, unable to decode nominal thread size, 2.040 inches nominal overall length, unable to decode thread class, unable to decode material.

NSN 5340-00-072-7368 Datasheet

(NSN) National Stock Number

5340-00-072-7368

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-072-7368

Requires Demilitarization

Yes

(INC) Item Name Code

30474

Date

Tue, Jan 1, 1963

Schedule B Code

8483308090

Material

unable to decode

Nominal Thread Size

unable to decode

Overall Length

2.040 inches nominal

Style Designator

internal thread, solid end

Thread Class

unable to decode

Thread Direction

unable to decode

Thread Length

unable to decode

Thread Series Designator

unable to decode

Unthreaded End Length

0.820 inches nominal

Unthreaded End Outside Diameter

0.438 inches minimum and 0.441 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0030474

Cross Reference

CAGE Codes

0JRC1

Northrop Grumman Technical Services, Inc. Dba Defense Systems Sector

U.s./canadian manufacturers

76823

Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

576 - Metal and metal products, nos, (less than 35 feet)

National Motor Freight Classification Item Number

052200

Schedule B & Trade

Schedule B

8483-30-8090

Description

plain shaft bearings, without housing, except spherical

End Use

21180 - Industrial machines, other

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

74822

(NAICS) North American Industrial Classification System

332991

Questions & Answers

1. What is the FSCG of the NSN 5340-00-072-7368?

   The FSCG of the NSN 5340-00-072-7368 is 5340

2. Does the NSN 5340-00-072-7368 have a Schedule B code assigned?

   Yes, the Schedule B code is 8483308090

3. Does NSN 5340-00-072-7368 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-00-072-7368 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-00-072-7368 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-072-7368 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963