NSN 200-3010

28.0 dc at sea level contact voltage rating in volts, 0.340 inches nominal single actuator first flat length, breaks before makes single section rear contact switching action, feat criticality code justification, 5.0 amperes resistive load dc at sea level contact load current rating.

NSN 5930-01-079-6074 Datasheet

(NSN) National Stock Number

5930-01-079-6074

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-079-6074

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Mon, Jul 9, 1979

Schedule B Code

8536509020

Contact Load Current Rating

5.0 amperes resistive load dc at sea level

Contact Switching Action

breaks before makes single section rear

Contact Voltage Rating In Volts

28.0 dc at sea level

Criticality Code Justification

feat

First Flat Length

0.340 inches nominal single actuator

Flat Height

0.210 inches nominal single actuator

Hazardous Locations/Environmental Protection

explosion proof

Individual Section Quantity

1

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Type

slotted bushing at 3:00 oclock

Overall Diameter

1.150 inches nominal

Overall Length

2.320 inches nominal

Pole Quantity

2 single section front

Rotor Through Connection Quantity

2 single section

Shaft Diameter

0.250 inches nominal single actuator

Shaft Flat/Slot Angular Location

165.0 degrees from nonturn device single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.490 inches nominal single actuator

Special Features

weapon system essentia;

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

3 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.430 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

3 single section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

31946

Cole Instrument Corp. Dba Cole Instruments

U.s./canadian manufacturers

91812

Janco Corporation Dba Janco Corp Div Mason Controls

U.s./canadian manufacturers

65960

Science Applications Intl Corp Range Systems

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-079-6074?

   The FSCG of the NSN 5930-01-079-6074 is 5930

2. Does the NSN 5930-01-079-6074 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-079-6074 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-079-6074 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-079-6074 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-079-6074 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Mon, Jul 9, 1979