NSN 203161015

A replaceable device designed to remove dust, pollen or other foreign matter from the air passing through it. The removal of particles is accomplished by porous fibrous or shredded material (metallic or nonmetallic) which is loosely woven or matted and confined in a frame or retained between perforated sheets of firmer material. It is designed to fit into air conditioners, ventilation systems and hot air furnaces. It may have facilities for radio frequency/electromagnetic interference shielding. The filter may be cleaned by the use of compressed air, blown through the filter element, or by using water and a suitable detergent for cleaning purposes which would extend the life of the filter.

0.315 inches nominal body height, 85.0 single section ambient temp in deg celsius per section at full rated power, single shaft actuator type, 1.250 inches nominal body length, 150.0 single section ambient temp in deg celsius per section at zero percent rated power.

NSN 5905-01-079-7235 Datasheet

(NSN) National Stock Number

5905-01-079-7235

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

01-079-7235

Requires Demilitarization

Yes

(INC) Item Name Code

37405

Date

Wed, Jul 11, 1979

Schedule B Code

8533400080

Actuator Type

single shaft

Ambient Temp In Deg Celsius Per Section At Full Rated Power

85.0 single section

Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

150.0 single section

Body Height

0.315 inches nominal

Body Length

1.250 inches nominal

Body Width

0.190 inches nominal

Body Style

rectangular w/mounting holes/slots

Center To Center Distance Between Center Terminal And Outside Terminal

0.300 inches nominal

Center To Center Distance Between Terminals

0.700 inches nominal

Center To Center Distance Between Terminal Rows

0.100 inches nominal

Electrical Resistance Per Section

50.000 ohms single section

Lateral Distance Between Mounting Hole Centers

1.000 inches nominal

Mounting Facility Quantity

2

Mounting Hole Diameter

0.093 inches nominal

Mounting Method

unthreaded hole(s)

Overall Height

0.815 inches nominal

Overall Length

1.308 inches nominal

Overall Width

0.190 inches nominal

Power Dissipation Rating Per Section In Watts

0.75 free air single section

Reliability Indicator

not established

Resistance Tolerance Per Section In Percent

-10.0 to 10.0 single section

Section Quantity

1

Shaft Diameter

0.115 inches nominal

Shaft Style

round, slotted

Shaft Length

0.058 inches nominal

Specification/Standard Data

81349-mil-r-22097/3 government specification

Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

-100.0 to 100.0 single section

Terminal Location

lower adjacent side two rows

Terminal Length

0.500 inches nominal

Terminal Type And Quantity

3 pin

Test Data Document

"81349-mil-r-22097 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0037405

Cross Reference

CAGE Codes

01399

Standard Mfg Inc

U.s./canadian manufacturers

32997

Bourns Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35140

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-40-0080

Description

variable resistors, including potentiometers, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77235

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-01-079-7235?

   The FSCG of the NSN 5905-01-079-7235 is 5905

2. Does the NSN 5905-01-079-7235 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533400080

3. Does NSN 5905-01-079-7235 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-01-079-7235 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5905-01-079-7235 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-01-079-7235 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Wed, Jul 11, 1979