NSN 2043A2

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

3.000 inches nominal body height, frequency rating, fully inclosed inclosure type, 7.500 inches nominal body length, 5.000 inches nominal body width.

NSN 5950-01-035-9579 Datasheet

(NSN) National Stock Number

5950-01-035-9579

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-035-9579

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Fri, Feb 18, 1977

Body Height

3.000 inches nominal

Body Length

7.500 inches nominal

Body Width

5.000 inches nominal

Frequency Rating

Inclosure Type

fully inclosed

Input-Output Phase Relationship

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

1 connector, plug and 3 connector, receptacle

Winding Function And Quantity

Winding Operating Current

unable to decode

Winding Operating Voltage

unable to decode

Winding Power Rating

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

13257

Amerace Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

52025

Siemens Energy & Automation, Inc. Dba Siemens Airfield Solutions Div Siemens Energy & Automation Dba Siemens Airfield Solutions

U.s./canadian manufacturers

24937

Federal Aviation Administration Specifications Promulgated by Federal Aviation Administration Aeronautical Center

Military standards and standards organizations (ex:stanags,milspecs,defstans)

11117

Amerace Corp Elastimold Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-01-035-9579?

   The FSCG of the NSN 5950-01-035-9579 is 5950

2. Does NSN 5950-01-035-9579 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-01-035-9579 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5950-01-035-9579 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-01-035-9579 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Fri, Feb 18, 1977