NSN 205257DL3

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

threaded bushing single mounting facility mounting method, 3 individual section quantity, 0.312 inches nominal single actuator first flat length, 0.375 inches single mounting facility nominal thread size, 0.188 inches nominal single actuator flat height.

NSN 5930-00-752-2986 Datasheet

(NSN) National Stock Number

5930-00-752-2986

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-752-2986

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jan 1, 1963

First Flat Length

0.312 inches nominal single actuator

Flat Height

0.188 inches nominal single actuator

Individual Section Quantity

3

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Overall Height

2.312 inches nominal

Overall Length

3.125 inches nominal

Overall Width

1.969 inches nominal

Shaft Diameter

0.250 inches nominal single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.625 inches nominal single actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

18 single actuator

Switch Actuator Positioning Increment

20.0 degrees single actuator

Switch Contact Basic Design

pile-up

Terminal Type

tab, solder lug

Thread Length

0.250 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

76854

Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Questions & Answers

1. What is the FSCG of the NSN 5930-00-752-2986?

   The FSCG of the NSN 5930-00-752-2986 is 5930

2. Does NSN 5930-00-752-2986 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5930-00-752-2986 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5930-00-752-2986 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5930-00-752-2986 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963