NSN 205545-3

ams 5643 assn std single material response overall material document and classification, steel comp 630 overall material, key centered on line with pivot pin hole on the shank end 0.171 in. min 0.174 in. max w special features, 1.170 inches minimum and 1.180 inches maximum shank diameter, 0.812 inches nominal end radius.

NSN 5340-00-413-3485 Datasheet

(NSN) National Stock Number

5340-00-413-3485

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-413-3485

Requires Demilitarization

Yes

(INC) Item Name Code

03796

Date

Wed, May 1, 1974

End Radius

0.812 inches nominal

Material Document And Classification

ams 5643 assn std single material response overall

Material

steel comp 630 overall

Shank Diameter

1.170 inches minimum and 1.180 inches maximum

Special Features

key centered on line with pivot pin hole on the shank end 0.171 in. min 0.174 in. max w

Style Designator

clevis

Surface Treatment

passivate overall

Test Data Document

"81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0003796

Cross Reference

CAGE Codes

82106

Parker-Hannifin Corporation Dba Control Systems Division

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

U - 50.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49240

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094140

Questions & Answers

1. What is the FSCG of the NSN 5340-00-413-3485?

   The FSCG of the NSN 5340-00-413-3485 is 5340

2. Does NSN 5340-00-413-3485 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-413-3485 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-00-413-3485 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-413-3485 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Wed, May 1, 1974