NSN 2062255

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

5999-00-910-5758, electrical-electronic heat sink.

NSN 5999-00-910-5758 Datasheet

(NSN) National Stock Number

5999-00-910-5758

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5999 - Miscellaneous Electrical and Electronic Components

(NIIN) National Item Identification Number

00-910-5758

Requires Demilitarization

Yes

(INC) Item Name Code

61433

Date

Fri, Jan 1, 1960

Schedule B Code

8543909000

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061433

Cross Reference

CAGE Codes

95750

Airco Republic Electronics, Inc. Div the Aeronautical Instrument & Radio Co

U.s./canadian manufacturers

98738

Herley Chicago Dba Stewart Warner Electronics

U.s./canadian manufacturers

28527

L3harris Technologies, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

J - 100.0

National Motor Freight Class Rating

M - 85.0

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

05380

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

063085

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5999-00-910-5758?

   The FSCG of the NSN 5999-00-910-5758 is 5999

2. Does the NSN 5999-00-910-5758 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5999-00-910-5758 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5999-00-910-5758 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5999-00-910-5758 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5999-00-910-5758 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960