NSN 20F299PC64

An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). Excludes:terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. For items having printed electrical conductor paths, see printed wiring board.

2.250 inches nominal distance between mounting hole centers, 0.063 inches nominal material thickness, not included cushion, 0.531 inches nominal distance between base and inside of arch, 0.625 inches nominal inside diameter/arch length.

NSN 5340-00-389-7278 Datasheet

(NSN) National Stock Number

5340-00-389-7278

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-389-7278

Requires Demilitarization

Yes

(INC) Item Name Code

05072

Date

Tue, Jan 1, 1963

Cushion

not included

Distance Between Base And Inside Of Arch

0.531 inches nominal

Distance Between Mounting Hole Centers

2.250 inches nominal

Inside Diameter/Arch Length

0.625 inches nominal

Material Thickness

0.063 inches nominal

Material

steel location not otherwise specified

Mounting Pad

not included

Mounting Hole Size

1.000 inches nominal

Overall Length

8.000 inches nominal

Overall Width

1.500 inches nominal

Special Features

four 0.375 in. dia holes and two 0.500 in. dia holes; one 0.313 in. dia hole in center

Style Designator

curved arch

Surface Treatment

cadmium

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0005072

Cross Reference

CAGE Codes

88657

Westinghouse Electric Corp Power Generation-Turbine Div

U.s./canadian manufacturers

90099

Northrop Grumman Systems Corporation Div Marine Systems

U.s./canadian manufacturers

79500

Westinghouse Electric Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

T - 55.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

87440

Water Commodity

579 - Steel springs, (less than 35 feet)

National Motor Freight Classification Item Number

178000

Questions & Answers

1. What is the FSCG of the NSN 5340-00-389-7278?

   The FSCG of the NSN 5340-00-389-7278 is 5340

2. Does NSN 5340-00-389-7278 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-389-7278 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-389-7278 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-389-7278 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963