NSN 2120F

A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes:washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.

five mtg holes 0.156 in. dia equally spaced on 0.250 in. dia bolt circle mounting configuration, 50.0 input impedance rating in ohms, copper alloy material, 50.0 output impedance rating in ohms, 1.625 inches nominal overall diameter.

NSN 5985-00-013-9452 Datasheet

(NSN) National Stock Number

5985-00-013-9452

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

00-013-9452

Requires Demilitarization

Yes

(INC) Item Name Code

00371

Date

Fri, May 10, 1968

Schedule B Code

8529109000

Material

Brass per mil-e-4158

Voltage Standing Wave Ratio At Reference Frequency

1.3 at 0.5 to 8.1 ghz

Unit Type

Coaxial line

Radio Frequency Rating

Between 0.5 gigahertz and 8.1 gigahertz

Mounting Configuration

Five mtg holes 0.156 in. diameter equally spaced on 0.25 in. diameter bolt circle

Output Impedance Rating In Ohms

50.0

Input Impedance Rating In Ohms

50.0

Overall Diameter

1.625in. ⁓1-5/8"

Overall Length

2.625in. ⁓2-5/8"

Material

Copper alloy

Precious Material and Location

Body rhodium and body silver

Precious Material

Rhodium and silver

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000371

Cross Reference

CAGE Codes

01882

Diamond Antenna & Microwave Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34460

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061520

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-00-013-9452?

   The FSCG of the NSN 5985-00-013-9452 is 5985

2. Does the NSN 5985-00-013-9452 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-00-013-9452 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5985-00-013-9452 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5985-00-013-9452 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-00-013-9452 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Fri, May 10, 1968