NSN 2129447-3

A flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.

28.0 dc at sea level contact voltage rating in volts, 3.0 amperes resistive load and 2.0 amperes inductive load dc at sea level contact load current rating, 115.0 ac at sea level contact voltage rating in volts, 5.0 amperes resistive load ac at sea level contact load current rating, breaks before makes each section rear contact switching action.

NSN 5930-00-369-7018 Datasheet

(NSN) National Stock Number

5930-00-369-7018

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-369-7018

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Sun, Mar 3, 1974

Schedule B Code

8536509020

Contact Load Current Rating

3.0 amperes resistive load and 2.0 amperes inductive load dc at sea level

Contact Load Current Rating

5.0 amperes resistive load ac at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

First Flat Length

0.250 inches nominal single actuator

Flat Height

0.210 inches nominal single actuator

Hazardous Locations/Environmental Protection

explosion proof

Individual Section Quantity

6

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.469 inches single mounting facility

Overall Diameter

2.000 inches maximum

Overall Length

3.695 inches maximum

Pole Quantity

1 each section front

Rotor Through Connection Quantity

1 each section

Shaft Diameter

0.250 inches nominal single actuator

Shaft Flat/Slot Angular Location

180.0 degrees from contact position 1 single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.750 inches nominal single actuator

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

24 single actuator

Switch Actuator Positioning Increment

15.0 degrees single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.370 inches nominal single mounting facility

Thread Quantity Per Inch

32 single mounting facility

Thread Series Designator

uns single mounting facility

Throw Quantity

24 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

19315

Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems

U.s./canadian manufacturers

55974

Honeywell Intl Inc Defense Avionics Systems Former Test Systems Div

U.s./canadian manufacturers

91812

Janco Corporation Dba Janco Corp Div Mason Controls

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-369-7018?

   The FSCG of the NSN 5930-00-369-7018 is 5930

2. Does the NSN 5930-00-369-7018 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-369-7018 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-369-7018 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-00-369-7018 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-369-7018 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Sun, Mar 3, 1974