NSN 21304A

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

breaks before makes each section rear contact switching action, 10.0 amperes resistive load highest ac voltage rating at sea level contact load current rating, 5.0 amperes resistive load lowest ac voltage rating at sea level contact load current rating, 10.0 amperes resistive load highest dc voltage rating at sea level contact load current rating, 2.0 amperes resistive load lowest dc voltage rating at sea level contact load current rating.

NSN 5930-00-150-0615 Datasheet

(NSN) National Stock Number

5930-00-150-0615

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-150-0615

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Fri, Oct 8, 1971

Schedule B Code

8536509025

Contact Load Current Rating

10.0 amperes resistive load highest ac voltage rating at sea level

Contact Load Current Rating

10.0 amperes resistive load highest dc voltage rating at sea level

Contact Load Current Rating

2.0 amperes resistive load lowest dc voltage rating at sea level

Contact Load Current Rating

5.0 amperes resistive load lowest ac voltage rating at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

125.0 highest dc voltage rating at sea level

Contact Voltage Rating In Volts

125.0 lowest ac voltage rating at sea level

Contact Voltage Rating In Volts

240.0 highest ac voltage rating at sea level

Contact Voltage Rating In Volts

28.0 lowest dc voltage rating at sea level

Features Provided

actuator knob

Hazardous Locations/Environmental Protection

dustproof

Individual Section Quantity

4

Knob Manufacturer Code

82121

Knob Manufacturer Part Number

a

Longest Horizontal Distance Between Mounting Centers

2.296 inches nominal single mounting facility

Longest Vertical Distance Between Mounting Centers

2.296 inches nominal single mounting facility

Mounting Facility Pattern

four position rectangular single mounting facility

Mounting Method

bracket(s) and threaded hole(s) single mounting facility

Nominal Thread Size

0.190 inches single mounting facility

Overall Height

2.812 inches nominal

Overall Length

4.313 inches nominal

Overall Width

2.812 inches nominal

Pole Quantity

1 each section rear

Shaft Length

1.125 inches nominal single actuator

Shaft Type

rectangular/square, threaded hole single actuator

Square Shaft Size

0.250 inches nominal single actuator

Style Designator

tap, circuit selector

Switch Actuator Indexing Position Quantity

8 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Actuator Stop Device Type

adjustable stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab w/screw

Thread Class

2b single mounting facility

Thread Quantity Per Inch

24 single mounting facility

Thread Series Designator

unified national coarse (unc) single mounting facility

Throw Quantity

7 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

80020

Naval Air Warfare Center Aircraft Division Joint Base Jbmdl

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-150-0615?

   The FSCG of the NSN 5930-00-150-0615 is 5930

2. Does the NSN 5930-00-150-0615 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-00-150-0615 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-150-0615 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-150-0615 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-150-0615 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Fri, Oct 8, 1971