NSN 2131850-8

An item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes:plug (as modified) and stopper, bottle. For items designed to fit into or over the opening(s) of various items, see cap-plug, protective, dust and moisture seal.

at pole two actuator position designation, multipole-single actuator type body style, trip-reset actuator function, 1.500 inches maximum body length, magnetic blowout arc quenching method.

NSN 5925-01-032-7780 Datasheet

(NSN) National Stock Number

5925-01-032-7780

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-032-7780

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Tue, Dec 21, 1976

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole two

Arc Quenching Method

magnetic blowout

Body Length

1.500 inches maximum

Body Style

multipole-single actuator type

Body Width

1.875 inches maximum

Bushing Length

0.380 inches maximum

Center To Center Distance Between Terminals Parallel To Length

0.875 inches nominal

Center To Center Distance Between Terminals Parallel To Width

0.625 inches nominal

Circuit Protection Type

overcurrent all locations

Fragility Factor

moderately rugged

Frequency In Hertz

60.0 all locations

Inclosure Protection Type For Which Designed

hermetically sealed and shockproof and vibrationproof

Internal Trip Release Configuration

series trip all locations

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Maximum Continuous Load Current Rating Per Pole

2.0 amperes ac first location

Maximum Continuous Load Current Rating Per Pole

10.0 amperes ac second location

Maximum Continuous Load Current Rating Per Pole

10.0 amperes ac third location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

300.0 ac all locations

Mounting Facility Type And Quantity

1 threaded bushing with panel seal

Mounting Surface To Terminal End Distance

1.780 inches maximum

Nominal Thread Size

0.375 inches

Nonturn Device Diameter

0.245 inches minimum and 0.255 inches maximum

Nonturn Device Length

0.135 inches minimum and 0.145 inches maximum

Nonturn Device Radius

0.620 inches minimum and 0.630 inches maximum

Operating Voltage Type And Rating Per Pole In Volts

115.0 ac all locations

Pole Quantity

3

Reset Method

manual

Special Features

nonturn device location: at 3 oclock, and 9 oclock

Special Handling Feature

magnetic

Storage Type

general purpose warehouse

Terminal Type And Quantity

6 wire hook

Thread Pitch Diameters

+0.3503 to 0.3537 inches

Thread Quantity Per Inch

32

Thread Series Designator

unef

Trip Delay Time In Seconds Per Rated Continuous Current

0.070 minimum at 200 pct and 0.700 maximum at 200 pct all locations

Trip Release Characteristic

time delay all locations

Trip Release Method

magnetic all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

115.0 all locations

Unpackaged Unit Weight

5.400 ounces nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

19315

Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems

U.s./canadian manufacturers

55974

Honeywell Intl Inc Defense Avionics Systems Former Test Systems Div

U.s./canadian manufacturers

81541

Sensata Technologies Maryland, Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-032-7780?

   The FSCG of the NSN 5925-01-032-7780 is 5925

2. Does the NSN 5925-01-032-7780 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-032-7780 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-032-7780 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-032-7780 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-032-7780 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Tue, Dec 21, 1976