NSN 217015.P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

15.000 continuous current rating in amps, tube type body style, nonrenewable fusible element features provided, normal instantaneous circuit over-current interruption type, 5.2 millimeters maximum body diameter.

NSN 5920-01-565-6972 Datasheet

(NSN) National Stock Number

5920-01-565-6972

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

01-565-6972

Requires Demilitarization

Yes

(INC) Item Name Code

00248

Date

Mon, Aug 4, 2008

Body Diameter

5.2 millimeters maximum

Body Style

tube type

Circuit Over-Current Interruption Type

normal instantaneous

Continuous Current Rating In Amps

15.000

Features Provided

nonrenewable fusible element

Interruption Indicator Method

visible element

Maximum Voltage Rating In Volts

250.0 ac

Overall Diameter

5.2 millimeters maximum

Overall Length

20.0 millimeters maximum

Special Features

glass body, brass cap; -55 to 125 deg c operating temperature; 0.004 ohms nominal resistance

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000248

Cross Reference

CAGE Codes

03956

Northrop Grumman Systems Corporation

U.s./canadian manufacturers

75915

Littelfuse, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34740

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062060

Questions & Answers

1. What is the FSCG of the NSN 5920-01-565-6972?

   The FSCG of the NSN 5920-01-565-6972 is 5920

2. Does NSN 5920-01-565-6972 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5920-01-565-6972 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5920-01-565-6972 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5920-01-565-6972 was assigned to the Federal Catalog?

   It was assigned 18 years ago, on Mon, Aug 4, 2008