NSN 221001300E

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

299.19 millimeters nominal cam overall length, 2355-01-654-5306; truck,cargo end item identification, s cam shape, involute spline drive type, 57.74 millimeters nominal cam width.

NSN 2530-01-710-9113 Datasheet

(NSN) National Stock Number

2530-01-710-9113

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2530 - Vehicular Brake, Steering, Axle, Wheel and Track Components

(NIIN) National Item Identification Number

01-710-9113

Requires Demilitarization

Yes

(INC) Item Name Code

10853

Date

Fri, Jul 7, 2023

Schedule B Code

8708300050

End Item Identification

2355-01-654-5306; truck,cargo

Cam Overall Length

299.19 millimeters nominal

Cam Shape

s

Cam Width

57.74 millimeters nominal

Drive Type

involute spline

Length

299.19 millimeters nominal

Material

steel

Part Name Assigned By Controlling Agency

camshaft, lh, brakes

Mounting Position

left side

Vehicle Identification Designator

fmtva2

Vehicle Design Control Activity

19207

Width

99.91 millimeters nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0010853

Cross Reference

CAGE Codes

3D6E9

Meritor Industrial Products, Llc

U.s./canadian manufacturers

75Q65

Oshkosh Defense Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

08480

Water Commodity

585 - Vehicles and auto supplies

National Motor Freight Classification Item Number

018400

Schedule B & Trade

Schedule B

8708-30-0050

Description

brakes and servo-brakes and parts, of motor vehicles of headings 8701 to 8705

End Use

30230 - Other parts and accessories of vehicles

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

78433

(NAICS) North American Industrial Classification System

336340

Questions & Answers

1. What is the FSCG of the NSN 2530-01-710-9113?

   The FSCG of the NSN 2530-01-710-9113 is 2530

2. Does the NSN 2530-01-710-9113 have a Schedule B code assigned?

   Yes, the Schedule B code is 8708300050

3. Does NSN 2530-01-710-9113 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2530-01-710-9113 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2530-01-710-9113 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2530-01-710-9113 was assigned to the Federal Catalog?

   It was assigned 3 years ago, on Fri, Jul 7, 2023