NSN 2221101

A manually or power operated valve having three or more ports. The direction of the flow through the various ports is controlled by either one or more reciprocating slide(s) or spool(s) with recess areas which mate with ports in an integral or replaceable ported sleeve, or one or more poppet(s). It is designed to change the direction of fluid flow from one valve port to another. An off (no flow) position is not a flow pattern. The valve is designed to actuate various components of a fluid system. A power operated valve may have a manual override. For items which stop, start, or change the flow of fluid, see: valve, solenoid. Excludes:valve, plug. See also servovalve, hydraulic; body section, working, linear directional control valve; and valve assembly.

8 bolt hole quantity, 3.812 inches nominal aperture width, 3.125 inches nominal aperture length, 2.594 inches nominal center to center distance between bolt holes along width, 2.250 inches nominal center to center distance between bolt holes along length.

NSN 5330-01-015-7465 Datasheet

(NSN) National Stock Number

5330-01-015-7465

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

01-015-7465

Requires Demilitarization

Yes

(INC) Item Name Code

04522

Date

Tue, Jan 27, 1976

Aperture Length

3.125 inches nominal

Aperture Width

3.812 inches nominal

Bolt Hole Quantity

8

Center To Center Distance Between Bolt Holes Along Length

2.250 inches nominal

Center To Center Distance Between Bolt Holes Along Width

2.594 inches nominal

Cross-Sectional Shape Style

solid single or composition

Cross-Sectional Thickness

0.027 inches minimum and 0.035 inches maximum

Hole Diameter

0.281 inches minimum and 0.296 inches maximum

Inside Corner Radius

0.500 inches nominal

Material Document And Classification

unable to decode

Material

Outside Corner Radius

0.250 inches nominal

Outside Edge To Bolt Hole Center Distance Along Length

0.312 inches nominal

Outside Edge To Bolt Hole Center Distance Along Width

0.312 inches nominal

Overall Length

5.125 inches nominal

Overall Width

5.812 inches nominal

Style Designator

non-circular

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0004522

Cross Reference

CAGE Codes

0NUS8

Henry Schein, Inc. Div Usdg Federal Division

Non-manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Questions & Answers

1. What is the FSCG of the NSN 5330-01-015-7465?

   The FSCG of the NSN 5330-01-015-7465 is 5330

2. Does NSN 5330-01-015-7465 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5330-01-015-7465 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5330-01-015-7465 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5330-01-015-7465 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Tue, Jan 27, 1976