NSN 222D152-3

An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors; however, excludes:filter (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see transformer, radio frequency. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see suppressor, parasitic.

200.0 volts per mil /0.001 inch/ dielectric material voltage rating per unit thickness, unable to decode distance from centerline of small end to edge of large end, black color, unable to decode distance from intersecting centerlines to edge of small end, unable to decode angle between large end and small end centerlines in deg.

NSN 5970-01-034-7135 Datasheet

(NSN) National Stock Number

5970-01-034-7135

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5970 - Electrical Insulators and Insulating Materials

(NIIN) National Item Identification Number

01-034-7135

Requires Demilitarization

Yes

(INC) Item Name Code

61626

Date

Sat, Jan 29, 1977

Schedule B Code

8546900000

Angle Between Large End And Small End Centerlines In Deg

unable to decode

Color

black

Dielectric Material Voltage Rating Per Unit Thickness

200.0 volts per mil /0.001 inch/

Distance From Centerline Of Small End To Edge Of Large End

unable to decode

Distance From Intersecting Centerlines To Edge Of Small End

unable to decode

Distance From Top Of Shoulder To Small End Of Main Body

unable to decode

Environmental Protection

corrosion resistant and flame resistant and mildew resistant and solvent resistant and water resistant

Flexibility

semirigid

Height

unable to decode

Large End Wall Thickness Of Main Body

unable to decode

Main Body Small End Inside Diameter

unable to decode

Main Body Large End Inside Diameter

unable to decode

Material Document And Classification

rt-301, raychem corp mfr ref single material response location not otherwise specified

Material

plastic polyolefin location not otherwise specified

Minimum Tensile Strength

1500 pounds per square inch

Small End Wall Thickness Of Main Body

unable to decode

Special Features

large end has lip

Style Designator

boot-90 degrees

Temp Rating

-55.0 celsius

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061626

Cross Reference

CAGE Codes

06090

Te Connectivity Corporation Dba Raychem Product Division

U.s./canadian manufacturers

19200

Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

53360

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

103300

Schedule B & Trade

Schedule B

8546-90-0000

Description

electrical insulators, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77324

(NAICS) North American Industrial Classification System

335932

Questions & Answers

1. What is the FSCG of the NSN 5970-01-034-7135?

   The FSCG of the NSN 5970-01-034-7135 is 5970

2. Does the NSN 5970-01-034-7135 have a Schedule B code assigned?

   Yes, the Schedule B code is 8546900000

3. Does NSN 5970-01-034-7135 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5970-01-034-7135 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5970-01-034-7135 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5970-01-034-7135 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Sat, Jan 29, 1977