NATO Stock Number
5905-00-005-2489
Sold in multiples of
1 EA
DEMIL
NO
Section Quantity
1
Body Style
Cylindrical servo mounted
Reliability Indicator
Not established
Pilot Diameter
0.96880 inches
Pilot Length
0.06200 inches
Overall Length
1.253 inches
Undercut Diameter
0.975 inches
Undercut Width
0.06200 inches
Body Diameter
1.062 inches
Shaft Diameter
0.1248 inches
Shaft Length
0.500 inches
Body Length
0.753 inches
Overall Diameter
1.438 inches
Mounting Lip Diameter
1.06200 inches
Mounting Lip Depth
0.06200 inches
Shaft Style
Round
Shaft Bearing Type
Ball
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
360.0
Maximum Starting Torque
0.15 inch-ounces
Maximum Running Torque
0.15 inch-ounces
Shaft Runout
0.001 inches
Lateral Runout
0.001 inches
Pilot Diameter Runout
0.00100 inches
Shaft Radial Play
0.0005 inches
Terminal Location
Radially positioned over more than half the circumference
Mounting Method
Clamp ring
Electrical Resistance Per Section
5.000 kilohms single section
Rotary Actuator Travel In Angular Deg
360.0
Function Conformity Tolerance Per Section
-0.50 to 0.50 single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section
Power Dissipation Rating Per Section In Watts
3.0 free air single section
Function Conformity Per Section
Single section independent linearity
Fixed Tap Quantity Per Section
3 single section
Tap Location Tolerance Per Section
-2.5/+2.5 degrees angular rotation single section
Resistance Tolerance Per Section In Percent
-5.0 to 5.0 single section
Actuator Travel Control Feature
Continuous motion
Tap Location From Ccw Terminal Per Section In Ohms
90.0 single section and 180.0 single section and 270.0 single section
Function Characteristic Per Section
Single section linear
Tempurature Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius
-20.0 to 20.0 single section
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
90.0 single section
Test Data Document
10001-2267384 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
5 turret