NSN 22D2G3

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode dc resistance rating in ohms, 1.500 inches nominal body height, 1.875 inches nominal body length, fully inclosed inclosure type, 1.500 inches nominal body width.

NSN 5950-00-645-7885 Datasheet

(NSN) National Stock Number

5950-00-645-7885

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-645-7885

Requires Demilitarization

Yes

(INC) Item Name Code

32494

Date

Tue, Jan 1, 1963

Schedule B Code

8504500000

Body Height

1.500 inches nominal

Body Length

1.875 inches nominal

Body Width

1.500 inches nominal

Dc Resistance Rating In Ohms

unable to decode

Inclosure Type

fully inclosed

Mounting Facility Quantity

unable to decode

Mounting Hole Diameter

unable to decode

Mounting Method

unable to decode

Rating Method

Reliability Indicator

not established

Terminal Type And Quantity

2 wire lead

Turn Quantity

unable to decode

Winding Conductor Size

unable to decode

Winding Operating Voltage

unable to decode

Winding Quantity

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032494

Cross Reference

CAGE Codes

03497

General Electric Co Outdoor Breaker Business Section

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063420

Schedule B & Trade

Schedule B

8504-50-0000

Description

inductors, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77125

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-00-645-7885?

   The FSCG of the NSN 5950-00-645-7885 is 5950

2. Does the NSN 5950-00-645-7885 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504500000

3. Does NSN 5950-00-645-7885 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-645-7885 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-645-7885 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-645-7885 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963