NSN 23032672

0.250 inches nominal first leg distance from edge to hole center along width, 0.500 inches nominal center section width, 90.0 degrees nominal first leg angle, 0.056 inches minimum and 0.068 inches maximum center section thickness, 0.682 inches nominal center section height.

NSN 5340-01-325-2829 Datasheet

(NSN) National Stock Number

5340-01-325-2829

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-325-2829

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Fri, Aug 31, 1990

Center Section Height

0.682 inches nominal

Center Section Thickness

0.056 inches minimum and 0.068 inches maximum

Center Section Width

0.500 inches nominal

First Leg Angle

90.0 degrees nominal

First Leg Distance From Edge To Hole Center Along Width

0.250 inches nominal

First Leg End Radius

0.250 inches minimum and 0.310 inches maximum

First Leg Hole Arrangement Style

one hole

First Leg Hole Diameter

0.279 inches minimum and 0.288 inches maximum

First Leg Distance From Edge To Hole Center Along Length

0.250 inches nominal

First Leg Style

end radius

First Leg Thickness

0.056 inches minimum and 0.068 inches maximum

First Leg Width

0.500 inches nominal

First Leg Length

0.580 inches nominal

Material Document And Classification

ams 5510 assn std single material response

Material

steel comp 321

Mounting Hole Type

plain

Second Leg Angle

90.0 degrees nominal

Second Leg End Radius

0.250 inches minimum and 0.310 inches maximum

Second Leg Hole Arrangement Style

one hole

Second Leg Hole Diameter

0.217 inches minimum and 0.225 inches maximum

Second Leg Length

0.690 inches nominal

Second Leg Distance From Edge To Hole Center Along Length

0.220 inches nominal

Second Leg Distance From Edge To Hole Center Along Width

0.250 inches nominal

Second Leg Width

0.500 inches nominal

Second Leg Relationship To First Leg

not identical

Second Leg Style

end radius

Second Leg Thickness

0.056 inches minimum and 0.068 inches maximum

Style Designator

double angle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

63005

Rolls-Royce Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-01-325-2829?

   The FSCG of the NSN 5340-01-325-2829 is 5340

2. Does NSN 5340-01-325-2829 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-325-2829 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-325-2829 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-325-2829 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Fri, Aug 31, 1990