NSN 230B1C205J

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

0.350 inches nominal body width, 1.170 inches nominal body length, 0.510 inches nominal body height, w/o mtg facilities, terminals on opposite surfaces body style, 2.000 microfarads single section capacitance value per section.

NSN 5910-01-129-1606 Datasheet

(NSN) National Stock Number

5910-01-129-1606

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-129-1606

Requires Demilitarization

Yes

(INC) Item Name Code

31959

Date

Thu, Apr 1, 1982

Schedule B Code

8532290040

Body Height

0.510 inches nominal

Body Length

1.170 inches nominal

Body Width

0.350 inches nominal

Body Style

w/o mtg facilities, terminals on opposite surfaces

Capacitance Value Per Section

2.000 microfarads single section

Dissipation Factor At Reference Temp In Percent

1.0000

Insulation Resistance At Maximum Operating Temp

4000.0 megohm-microfarads

Insulation Resistance At Reference Temp

40000.0 megohm-microfarads

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

200.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.032 inches nominal

Terminal Length

2.000 inches nominal

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0031959

Cross Reference

CAGE Codes

31795

Eaton Corporation

U.s./canadian manufacturers

14752

Electrocube, Inc. Dba Electrocube Inc

U.s./canadian manufacturers

80009

Tektronix, Inc.

U.s./canadian manufacturers

07994

American Radionic Co Inc

U.s./canadian manufacturers

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

3B4M0

Lucent Technologies Inc Corporate Headquarters

Non-manufacturers

18410

Rycom Instruments, Inc.

U.s./canadian manufacturers

01002

General Electric Co Capacitors Div

U.s./canadian manufacturers

04099

Cci Capco, Llc Dba Valor Tactical Innovation

U.s./canadian manufacturers

84411

American Shizuki Corp

U.s./canadian manufacturers

12406

Streamline Avionics Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-129-1606?

   The FSCG of the NSN 5910-01-129-1606 is 5910

2. Does the NSN 5910-01-129-1606 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-129-1606 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-129-1606 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-129-1606 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-129-1606 was assigned to the Federal Catalog?

   It was assigned 44 years ago, on Thu, Apr 1, 1982