NSN 237DM5

An item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. Either the brush or the surface is continually moving during the transfer of energy. The brush is usually composed in part of some form of the element carbon. Includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. Does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. Excludes: contact, electrical; and contact assembly, electrical.

2.0 amperes resistive load dc at sea level contact load current rating, 1.500 inches nominal single mounting facility distance between mounting facility centers, 2 individual section quantity, makes before breaks each section rear contact switching action, 28.0 dc at sea level contact voltage rating in volts.

NSN 5930-00-059-2734 Datasheet

(NSN) National Stock Number

5930-00-059-2734

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-059-2734

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jun 6, 1967

Schedule B Code

8536509020

Contact Load Current Rating

2.0 amperes resistive load dc at sea level

Contact Switching Action

makes before breaks each section rear

Contact Voltage Rating In Volts

28.0 dc at sea level

Distance Between Mounting Facility Centers

1.500 inches nominal single mounting facility

Individual Section Quantity

2

Mounting Facility Pattern

two position in-line single mounting facility

Mounting Method

bracket(s) and threaded hole(s) single mounting facility

Nominal Thread Size

0.164 inches single mounting facility

Overall Height

2.250 inches nominal

Overall Length

2.875 inches nominal

Overall Width

2.250 inches nominal

Pole Quantity

3 each section rear

Shaft Diameter

0.250 inches nominal single actuator

Shaft Type

round single actuator

Shaft Length

0.938 inches nominal single actuator

Style Designator

tap, square frame

Switch Actuator Indexing Position Quantity

5 single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

turret

Thread Class

2a single mounting facility

Thread Quantity Per Inch

32 single mounting facility

Thread Series Designator

unified national coarse (unc) single mounting facility

Throw Quantity

5 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

94135

Naval Ordnance Standards

Military standards and standards organizations (ex:stanags,milspecs,defstans)

28057

Shallco, Inc

U.s./canadian manufacturers

58880

Meggitt (new Hampshire), Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-059-2734?

   The FSCG of the NSN 5930-00-059-2734 is 5930

2. Does the NSN 5930-00-059-2734 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-059-2734 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-059-2734 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-059-2734 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-059-2734 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Tue, Jun 6, 1967