1. Home /
  2. FSC NSN Catalog /
  3. Coils and Transformers /
  4. 240-1592-000

NSN 240-1592-000

Radio Frequency Coil

An elastic material of compact (solid) or cellular structure having smooth, crepe or porous surface(s) and having an oval, parallelogram, square, rectangular or d-shaped cross section. It is produced in various thicknesses. Strips are limited to widths of 6 inches (152.4mm) or less. It may or may not have a nonrubber backing or a wire cloth or cord insert. For items having a round cross section, see rubber round section. Excludes:rubber sheet, inner tube repair. See also nonmetallic angle; nonmetallic channel; nonmetallic special shaped section.

fully inclosed inclosure type, 125.0 celsius maximum operating temp, 0.177 inches minimum and 0.197 inches maximum overall diameter, 0.427 inches minimum and 0.447 inches maximum overall length, not established reliability indicator.

NSN 5950-00-059-3904 Datasheet

(NSN) National Stock Number
5950-00-059-3904
(FSC) Federal Supply Classification
5950 - Coils and Transformers
(NIIN) National Item Identification Number
00-059-3904
Requires Demilitarization
Yes
(INC) Item Name Code
06338
Date
Sun, Jan 1, 1961
Schedule B Code
8504500000
Inclosure Type
fully inclosed
Maximum Operating Temp
125.0 celsius
Overall Diameter
0.177 inches minimum and 0.197 inches maximum
Overall Length
0.427 inches minimum and 0.447 inches maximum
Reliability Indicator
not established
Terminal Type And Quantity
2 wire lead
Test Data Document
"81349-mil-c-15305 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Special Features
suffix letter on p/n 4411-12k denotes std tolerance of 10 pct

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
U - Precious metal content is unknown
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0006338

Cross Reference

CAGE Codes

92110
Servo Corporation of America
U.s./canadian manufacturers
99800
American Precision Industries Inc.
U.s./canadian manufacturers
13499
Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems
U.s./canadian manufacturers
71279
Interconnection Products Inc
U.s./canadian manufacturers
13488
Datron the Instruments Inc
U.s./canadian manufacturers
37695
Raytheon Company
U.s./canadian manufacturers
59474
Jeffers Electronics Inc
U.s./canadian manufacturers
A00AM
E.c.a Etablissement Central des Approvisionnements des Forces Armees Royales
Military standards and standards organizations (ex:stanags,milspecs,defstans)
56232
Lockheed Martin Corporation Div Rms - Mitchel Field
Non-manufacturers
32159
West Cap Arizona
U.s./canadian manufacturers
03538
Lockheed Martin Corporation Div Rms
U.s./canadian manufacturers
76493
Bell Industries Inc J W Miller Magnetics Div
U.s./canadian manufacturers
09021
Airco Inc Airco Electronics
U.s./canadian manufacturers
81349
Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Military standards and standards organizations (ex:stanags,milspecs,defstans)
96906
Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M
Military standards and standards organizations (ex:stanags,milspecs,defstans)
00213
Struthers-Dunn Inc.
U.s./canadian manufacturers

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
P - 77.5
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
34700
Water Commodity
595 - Transformer, (machinery and parts),(less than 35 feet)
National Motor Freight Classification Item Number
061980

Schedule B & Trade

Schedule B
8504-50-0000
Description
inductors, nesoi
End Use
20000 - Generators, accessories
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77125
(NAICS) North American Industrial Classification System
334416

Questions & Answers

  1. What is the FSCG of the NSN 5950-00-059-3904?

    The FSCG of the NSN 5950-00-059-3904 is 5950

  2. Does the NSN 5950-00-059-3904 have a Schedule B code assigned?

    Yes, the Schedule B code is 8504500000

  3. Does NSN 5950-00-059-3904 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 5950-00-059-3904 contain precious materials?

    Precious metal content is unknown

  5. Does NSN 5950-00-059-3904 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 5950-00-059-3904 was assigned to the Federal Catalog?

    It was assigned 65 years ago, on Sun, Jan 1, 1961

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.