NSN 2404H

"a device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes:circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller."

500.0 highest ac voltage rating at sea level contact voltage rating in volts, breaks before makes each section rear contact switching action, 20.0 amperes resistive load lowest ac voltage rating at sea level contact load current rating, 125.0 lowest ac voltage rating at sea level contact voltage rating in volts, 5.0 amperes resistive load highest ac voltage rating at sea level contact load current rating.

NSN 5930-01-033-9671 Datasheet

(NSN) National Stock Number

5930-01-033-9671

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-033-9671

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Sat, Jan 15, 1977

Schedule B Code

8536509025

Contact Load Current Rating

20.0 amperes resistive load lowest ac voltage rating at sea level

Contact Load Current Rating

5.0 amperes resistive load highest ac voltage rating at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

125.0 lowest ac voltage rating at sea level

Contact Voltage Rating In Volts

500.0 highest ac voltage rating at sea level

Features Provided

actuator knob

Hazardous Locations/Environmental Protection

explosion proof

Individual Section Quantity

2

Knob Manufacturer Code

82121

Knob Manufacturer Part Number

h

Longest Horizontal Distance Between Mounting Centers

2.000 inches nominal single mounting facility

Longest Vertical Distance Between Mounting Centers

2.188 inches nominal single mounting facility

Mounting Facility Pattern

isosceles triangle single mounting facility

Mounting Method

unthreaded hole(s) single mounting facility

Overall Height

2.906 inches nominal

Overall Length

5.376 inches nominal

Overall Width

2.813 inches nominal

Pole Quantity

1 each section rear

Precious Material And Location

contact surface silver and terminal surface silver

Precious Material

silver

Shaft Length

2.438 inches nominal single actuator

Shaft Type

rectangular/square, threaded hole single actuator

Shortest Horizontal Distance Between Mounting Centers

1.000 inches nominal single mounting facility

Square Shaft Size

0.250 inches nominal single actuator

Style Designator

tap, circuit selector

Switch Actuator Indexing Position Quantity

3 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab w/screw

Throw Quantity

3 each section rear

Unthreaded Mounting Hole Diameter

0.221 inches nominal single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

89219

Long Beach Naval Shipyard

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-033-9671?

   The FSCG of the NSN 5930-01-033-9671 is 5930

2. Does the NSN 5930-01-033-9671 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-01-033-9671 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-033-9671 contain precious materials?

   Item contains silver.

5. Does NSN 5930-01-033-9671 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-033-9671 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Sat, Jan 15, 1977