NSN 244382

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.740 inches minimum and 0.770 inches maximum fastener length, hardness rating, flat chamfer head style, 0.244 inches minimum and 0.250 inches maximum head height, 0.367 inches minimum and 0.375 inches maximum head diameter.

NSN 5306-00-086-5380 Datasheet

(NSN) National Stock Number

5306-00-086-5380

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5306 - Bolts

(NIIN) National Item Identification Number

00-086-5380

Requires Demilitarization

Yes

(INC) Item Name Code

06666

Date

Fri, Dec 29, 1967

Schedule B Code

7318152000

Fastener Length

0.740 inches minimum and 0.770 inches maximum

Hardness Rating

Head Diameter

0.367 inches minimum and 0.375 inches maximum

Head Height

0.244 inches minimum and 0.250 inches maximum

Head Style

flat chamfer

Hole Configuration Style

hexagon flats

Hole Diameter

0.062 inches nominal

Hole Quantity

1

Hole Type

drilled

Internal Drive Style

hexagon

Material

unable to decode

Minimum Tensile Strength

190000 pounds per square inch

Nominal Thread Diameter

0.250 inches

Surface Treatment

Thread Class

3a

Thread Direction

right-hand

Thread Length

0.740 inches minimum and 0.770 inches maximum

Thread Quantity Per Inch

20

Thread Series Designator

unified national coarse (unc)

Width Across Flats

0.188 inches minimum and 0.190 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0006666

Cross Reference

CAGE Codes

0KDP7

Kidde-Fenwal, Llc

Non-manufacturers

16004

Davey Compressor Co Div of Keco Industries Inc

U.s./canadian manufacturers

5RQL2

Drs Environmental Systems Inc

U.s./canadian manufacturers

92878

Hdt Expeditionary Systems Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

48950

Water Commodity

573 - Bolts or nuts (iron or steel),(less than 35 feet)

National Motor Freight Classification Item Number

093486

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5306-00-086-5380?

   The FSCG of the NSN 5306-00-086-5380 is 5306

2. Does the NSN 5306-00-086-5380 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5306-00-086-5380 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5306-00-086-5380 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5306-00-086-5380 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5306-00-086-5380 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Fri, Dec 29, 1967