NSN 2448765-1REVB

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

2.630 inches minimum and 2.870 inches maximum body diameter, 70.0 celsius input coolant temp, forced liquid cooling method, 0.8 gallons per minute cooling system coolant flow rate, 75.0 pounds per square inch gage coolant chamber pressure.

NSN 5985-00-982-2003 Datasheet

(NSN) National Stock Number

5985-00-982-2003

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

00-982-2003

Requires Demilitarization

Yes

(INC) Item Name Code

00335

Date

Wed, Oct 19, 1966

Schedule B Code

9030330080

Body Diameter

2.630 inches minimum and 2.870 inches maximum

Coolant Chamber Pressure

75.0 pounds per square inch gage

Cooling Method

forced liquid

Cooling System Coolant Flow Rate

0.8 gallons per minute

Input Coolant Temp

70.0 celsius

Operating Position

horizontal

Overall Length

7.230 inches minimum and 7.270 inches maximum

Overall Width

5.453 inches nominal

Power Rating

7.000 kilowatts peak and 4.000 kilowatts average

Special Features

four 0.169 in. dia mtg holes spaced on 1.280 in. by 1.220 in. mtg centers

Style Designator

waveguide mounted

Termination Type

waveguide flange

Voltage Standing Wave Ratio

1.15

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000335

Cross Reference

CAGE Codes

2B487

Raytheon Service Co Logistics Support Center

U.s./canadian manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

W - Rating variable

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

5 - Low sensitivity, category iv, aa&e, unclassified

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35120

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062920

Schedule B & Trade

Schedule B

9030-33-0080

Description

instruments and apparatus for measuring or checking power, without a recording device, nesoi

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87475

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 5985-00-982-2003?

   The FSCG of the NSN 5985-00-982-2003 is 5985

2. Does the NSN 5985-00-982-2003 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030330080

3. Does NSN 5985-00-982-2003 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

4. Does NSN 5985-00-982-2003 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-00-982-2003 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-00-982-2003 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Wed, Oct 19, 1966