NSN 24502-512PC13

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

1.850 inches nominal first leg distance between hole centers along length, 90.0 degrees nominal first leg angle, 0.500 inches nominal first leg distance from edge to hole center along width, four holes first leg hole arrangement style, 0.281 inches nominal first leg hole diameter.

NSN 5340-01-050-3274 Datasheet

(NSN) National Stock Number

5340-01-050-3274

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-050-3274

Requires Demilitarization

Yes

(INC) Item Name Code

16900

Date

Sat, Nov 5, 1977

First Leg Angle

90.0 degrees nominal

First Leg Distance From Edge To Hole Center Along Width

0.500 inches nominal

First Leg Hole Arrangement Style

four holes

First Leg Hole Diameter

0.281 inches nominal

First Leg Distance Between Hole Centers Along Length

1.850 inches nominal

First Leg Distance Between Hole Centers Along Width

1.250 inches nominal

First Leg Distance From Edge To Hole Center Along Length

0.400 inches nominal

First Leg Style

square

First Leg Thickness

0.125 inches nominal

First Leg Width

2.250 inches nominal

First Leg Length

2.750 inches nominal

Second Leg Distance Between First And Second Hole Centers Along Width

0.735 inches nominal

Second Leg Distance Between Hole Centers Along Length

1.860 inches nominal

Second Leg Hole Arrangement Style

four holes

Second Leg Distance Between Lower Hole Centers Along Width

2.250 inches nominal

Second Leg Distance Between Upper Hole Centers Along Width

3.720 inches nominal

Second Leg Distance From Edge To Hole Center Along Length

0.650 inches nominal

Second Leg Distance From Edge To Hole Center Along Width

0.500 inches nominal

Second Leg Thickness

0.125 inches nominal

Second Leg Width

4.720 inches nominal

Second Leg Length

5.310 inches nominal

Style Designator

angle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016900

Cross Reference

CAGE Codes

05CK7

Wintec Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-01-050-3274?

   The FSCG of the NSN 5340-01-050-3274 is 5340

2. Does NSN 5340-01-050-3274 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-050-3274 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-01-050-3274 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-050-3274 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Sat, Nov 5, 1977