NSN 24904ML

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. For an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. Excludes:printed circuit board

20.0 amperes resistive load lowest ac voltage rating at sea level contact load current rating, breaks before makes third section rear contact switching action, 5.0 amperes resistive load highest ac voltage rating at sea level contact load current rating, makes before breaks first section rear contact switching action, breaks before makes fourth section rear contact switching action.

NSN 5930-01-042-7638 Datasheet

(NSN) National Stock Number

5930-01-042-7638

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-042-7638

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jun 14, 1977

Schedule B Code

8536509025

Contact Load Current Rating

20.0 amperes resistive load lowest ac voltage rating at sea level

Contact Load Current Rating

5.0 amperes resistive load highest ac voltage rating at sea level

Contact Switching Action

breaks before makes fourth section rear

Contact Switching Action

breaks before makes third section rear

Contact Switching Action

makes before breaks first section rear

Contact Switching Action

makes before breaks second section rear

Contact Voltage Rating In Volts

125.0 lowest ac voltage rating at sea level

Contact Voltage Rating In Volts

500.0 highest ac voltage rating at sea level

Features Provided

actuator knob

Hazardous Locations/Environmental Protection

dustproof

Individual Section Quantity

4

Knob Manufacturer Code

82121

Knob Manufacturer Part Number

c

Longest Horizontal Distance Between Mounting Centers

2.000 inches nominal single mounting facility

Longest Vertical Distance Between Mounting Centers

2.188 inches nominal single mounting facility

Mounting Facility Pattern

isosceles triangle single mounting facility

Mounting Method

unthreaded hole(s) single mounting facility

Overall Height

2.906 inches nominal

Overall Length

6.626 inches nominal

Overall Width

2.813 inches nominal

Pole Quantity

1 each section rear

Shortest Horizontal Distance Between Mounting Centers

1.000 inches nominal single mounting facility

Style Designator

tap, circuit selector

Switch Actuator Indexing Position Quantity

3 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Actuator Stop Device Type

adjustable stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab w/screw

Throw Quantity

3 each section rear

Unthreaded Mounting Hole Diameter

0.221 inches nominal single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-042-7638?

   The FSCG of the NSN 5930-01-042-7638 is 5930

2. Does the NSN 5930-01-042-7638 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-01-042-7638 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-042-7638 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-042-7638 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-042-7638 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Tue, Jun 14, 1977