NSN 249739MF7

An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. For items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. Excludes:thumbscrew.

0.5 amperes resistive load ac at sea level contact load current rating, makes before breaks each section front contact switching action, 0.5 amperes resistive load ac at sea levelunable to decode contact load current rating, unable to decode contact load current rating, 1.0 amperes resistive load dc at sea level contact load current rating.

NSN 5930-00-499-2033 Datasheet

(NSN) National Stock Number

5930-00-499-2033

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-499-2033

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Mon, Oct 13, 1969

Schedule B Code

8536509020

Contact Load Current Rating

unable to decode

Contact Load Current Rating

0.5 amperes resistive load ac at sea level

Contact Load Current Rating

0.5 amperes resistive load ac at sea levelunable to decode

Contact Load Current Rating

1.0 amperes resistive load dc at sea level

Contact Switching Action

makes before breaks each section front

Contact Switching Action

makes before breaks each section rear

Contact Voltage Rating In Volts

110.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

Detent Rotational Torque Range

+30.000 to 45.000 inch-ounces all actuators

Detent Rotational Torque Range

unable to decode

Individual Section Quantity

7

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.625 inches single mounting facility

Nonturn Device Radius

0.531 inches nominal at 10:00 oclock

Nonturn Device Type

tab at 10:00 oclock

Overall Height

2.312 inches nominal

Overall Length

7.644 inches nominal

Overall Width

1.968 inches nominal

Precious Material And Location

clips and rotor blades silver

Precious Material

silver

Shaft Diameter

0.250 inches nominal second actuator

Shaft Diameter

0.375 inches nominal first actuator

Shaft Type

round second actuator

Shaft Type

round, hollowed first actuator

Shaft Length

0.703 inches nominal first actuator

Shaft Length

0.938 inches nominal second actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

24 second actuator

Switch Actuator Indexing Position Quantity

24 first actuator

Switch Actuator Positioning Increment

15.0 degrees first actuator

Switch Actuator Positioning Increment

15.0 degrees second actuator

Switch Actuator Stop Device Type

fixed stop all actuators

Switch Actuator Stop Device Type

unable to decode

Switch Contact Basic Design

nonpile-up nonsymmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.375 inches nominal single mounting facility

Thread Series Designator

unable to decode

Thread Series Designator

unef single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

76854

Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch

U.s./canadian manufacturers

80009

Tektronix, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-499-2033?

   The FSCG of the NSN 5930-00-499-2033 is 5930

2. Does the NSN 5930-00-499-2033 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-499-2033 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-499-2033 contain precious materials?

   Item contains silver.

5. Does NSN 5930-00-499-2033 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-499-2033 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Mon, Oct 13, 1969