NSN 2602-22P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

cordless; includes sawzall; 1/2 inch hammer-drill; 4-pole frameless motor; 450 in/lbs peak torque; 0-450/0-1700 rpm; 2900bpm; 8-1/2 inch length; digital power management; overload protection; metal gear case; metal 1/2 inch single sleeve ratcheting chuck; 18 volt special features, hammer-drill 1; compact lithium batteries 2; charger 1; kitbox 1 nonsupply items and quantities.

NSN 5180-01-581-0075 Datasheet

(NSN) National Stock Number

5180-01-581-0075

(FSG) Federal Supply Group

51 - Hand Tools

(FSC) Federal Supply Classification

5180 - Outfits of Hand Tools, Kits and Sets

(NIIN) National Item Identification Number

01-581-0075

Requires Demilitarization

Yes

(INC) Item Name Code

34581

Date

Mon, Jan 4, 2010

Schedule B Code

8205906000

Nonsupply Items And Quantities

hammer-drill 1; compact lithium batteries 2; charger 1; kitbox 1

Special Features

cordless; includes sawzall; 1/2 inch hammer-drill; 4-pole frameless motor; 450 in/lbs peak torque; 0-450/0-1700 rpm; 2900bpm; 8-1/2 inch length; digital power management; overload protection; metal gear case; metal 1/2 inch single sleeve ratcheting chuck; 18 volt

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0034581

Cross Reference

CAGE Codes

40817

Milwaukee Electric Tool Corp Dba Milwaukee Electric Tools

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8205-90-6000

Description

sets of articles of 2 or more of foregoing subheading (handtools)

End Use

21190 - Photo, service industry machinery

Unit of Quantity

PCS

USDA

Yes

(SITC) Standard International Trade Classification

69549

(NAICS) North American Industrial Classification System

332216

Questions & Answers

1. What is the FSCG of the NSN 5180-01-581-0075?

   The FSCG of the NSN 5180-01-581-0075 is 5180

2. Does the NSN 5180-01-581-0075 have a Schedule B code assigned?

   Yes, the Schedule B code is 8205906000

3. Does NSN 5180-01-581-0075 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5180-01-581-0075 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5180-01-581-0075 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5180-01-581-0075 was assigned to the Federal Catalog?

   It was assigned 16 years ago, on Mon, Jan 4, 2010