NSN 261D2417

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode design type, unable to decode beam scanning method, unable to decode connector end design, coaxial connector series designation, unable to decode electromagnetic polarization type.

NSN 5985-01-483-0198 Datasheet

(NSN) National Stock Number

5985-01-483-0198

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-483-0198

Requires Demilitarization

Yes

(INC) Item Name Code

00749

Date

Tue, Mar 13, 2001

Schedule B Code

9803200000

Beam Scanning Method

unable to decode

Coaxial Connector Series Designation

Connector End Design

unable to decode

Design Type

unable to decode

Electromagnetic Polarization Type

unable to decode

Frequency Rating

Mounting Hole Diameter

0.199 inches nominal

Mounting Method

unthreaded hole(s)

Overall Height

12.000 inches maximum

Overall Length

7.000 inches nominal

Overall Width

3.250 inches nominal

Radiation Pattern

unable to decode

Terminal Type

unable to decode

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000749

Cross Reference

CAGE Codes

00752

L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

9803-20-0000

Description

military equipments not identified by kind

End Use

50070 - Parts for military-type goods

Unit of Quantity

X

USDA

Yes

(SITC) Standard International Trade Classification

93100

(NAICS) North American Industrial Classification System

990000

Questions & Answers

1. What is the FSCG of the NSN 5985-01-483-0198?

   The FSCG of the NSN 5985-01-483-0198 is 5985

2. Does the NSN 5985-01-483-0198 have a Schedule B code assigned?

   Yes, the Schedule B code is 9803200000

3. Does NSN 5985-01-483-0198 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5985-01-483-0198 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-483-0198 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-483-0198 was assigned to the Federal Catalog?

   It was assigned 25 years ago, on Tue, Mar 13, 2001