NSN 263-0013-05

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

uninclosed inclosure type, 3 individual switch quantity, centralab controlling agency, two 0.120 in. dia mtg holes spaced 1.663 in. c to c mounting configuration, 3l type no. identifying number.

NSN 5930-01-030-3121 Datasheet

(NSN) National Stock Number

5930-01-030-3121

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-030-3121

Requires Demilitarization

Yes

(INC) Item Name Code

00711

Date

Tue, Nov 2, 1976

Schedule B Code

8538907080

Controlling Agency

centralab

Identifying Number

3l type no.

Individual Switch Quantity

3

Inclosure Type

uninclosed

Mounting Configuration

two 0.120 in. dia mtg holes spaced 1.663 in. c to c

Mounting Method

bracket(s) and hole

Overall Height

0.987 inches nominal

Overall Length

1.912 inches nominal

Overall Width

0.505 inches nominal

Switch Type

push

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000711

Cross Reference

CAGE Codes

71590

Crl Components Inc

U.s./canadian manufacturers

80009

Tektronix, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5930-01-030-3121?

   The FSCG of the NSN 5930-01-030-3121 is 5930

2. Does the NSN 5930-01-030-3121 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5930-01-030-3121 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-030-3121 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-030-3121 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-030-3121 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Tue, Nov 2, 1976