NSN 264-112

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

screw mounting method, -35.0 to 105.0 celsius operating temp range, ac or dc current type, regular block type, 20.0 current rating in amps.

NSN 5940-01-476-3040 Datasheet

(NSN) National Stock Number

5940-01-476-3040

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5940 - Terminal Strips, Terminals and Lugs

(NIIN) National Item Identification Number

01-476-3040

Requires Demilitarization

Yes

(INC) Item Name Code

32508

Date

Fri, Jul 7, 2000

Schedule B Code

8536904000

Block Type

regular

Current Rating In Amps

20.0

Current Type

ac or dc

Mounting Method

screw

Operating Temp Range

-35.0 to 105.0 celsius

Overall Height

0.867 inches nominal

Overall Length

1.260 inches nominal

Overall Width

0.236 inches nominal

Special Features

actual terminal type is a cage clamp which can be connected and disconnected; wiring is front entry; stripped length is 0.33 inches; block material is of a polyamide type

Pole Quantity

12

Terminal Design

feedthru

Terminal Type And Quantity

24 quick connect

Voltage Rating

600.0 volts nominal

Wire Size Accommodated

28.000 awg minimum and 12.000 awg maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032508

Cross Reference

CAGE Codes

65996

Wago Corporation

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-90-4000

Description

terminals, electrical splices and electrical couplings; wafer probers with a voltage not exceeding 1000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77259

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5940-01-476-3040?

   The FSCG of the NSN 5940-01-476-3040 is 5940

2. Does the NSN 5940-01-476-3040 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536904000

3. Does NSN 5940-01-476-3040 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5940-01-476-3040 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5940-01-476-3040 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5940-01-476-3040 was assigned to the Federal Catalog?

   It was assigned 26 years ago, on Fri, Jul 7, 2000