NSN 265504

A flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.

500.0 milliamperes resistive load ac at sea level contact load current rating, makes before breaks each section rear contact switching action, 28.0 dc at sea level contact voltage rating in volts, 1.0 amperes resistive load dc at sea level contact load current rating, 110.0 ac at sea level contact voltage rating in volts.

NSN 5930-00-488-7327 Datasheet

(NSN) National Stock Number

5930-00-488-7327

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-488-7327

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Wed, May 20, 1970

Schedule B Code

8536509020

Contact Load Current Rating

500.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

1.0 amperes resistive load dc at sea level

Contact Switching Action

makes before breaks each section rear

Contact Voltage Rating In Volts

110.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

Individual Section Quantity

2

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.521 inches minimum and 0.541 inches maximum at 10:00 oclock

Nonturn Device Type

tab at 10:00 oclock

Overall Height

1.516 inches minimum and 1.546 inches maximum

Overall Length

2.469 inches minimum and 2.563 inches maximum

Overall Width

1.296 inches minimum and 1.328 inches maximum

Pole Quantity

1 each section front

Rotor Through Connection Quantity

1 each section

Shaft Diameter

0.250 inches nominal single actuator

Shaft Type

round single actuator

Shaft Length

0.750 inches nominal single actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

14 single actuator

Switch Actuator Positioning Increment

25.7 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.375 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

14 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

3SLK7

Lds Test and Measurement Llc

Non-manufacturers

96795

Gould Instrument Systems Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-488-7327?

   The FSCG of the NSN 5930-00-488-7327 is 5930

2. Does the NSN 5930-00-488-7327 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-488-7327 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-488-7327 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-488-7327 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-488-7327 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Wed, May 20, 1970