NSN 267626BA2

A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see spacer, plate. Excludes:items with lubricating features, see bearing, sleeve and bushing, sleeve. See also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).

+12.000 to 64.000 inch-ounces single actuator detent rotational torque range, 28.0 dc at sea level contact voltage rating in volts, 200.0 milliamperes resistive load and 20.0 milliamperes inductive load dc at sea level contact load current rating, 100.0 milliamperes resistive load ac at sea level contact load current rating, 115.0 ac at sea level contact voltage rating in volts.

NSN 5930-00-162-1838 Datasheet

(NSN) National Stock Number

5930-00-162-1838

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-162-1838

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Wed, Nov 3, 1971

Schedule B Code

8536509025

Contact Load Current Rating

100.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

200.0 milliamperes resistive load and 20.0 milliamperes inductive load dc at sea level

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

Detent Rotational Torque Range

+12.000 to 64.000 inch-ounces single actuator

First Flat Length

0.500 inches nominal single actuator

Flat Height

0.198 inches minimum and 0.202 inches maximum single actuator

Individual Section Quantity

2

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.375 inches nominal at 3:00 oclock

Nonturn Device Type

tab at 3:00 oclock

Operating Temp Range

-65.0 to 85.0 celsius

Overall Height

1.048 inches maximum

Overall Length

3.126 inches maximum

Overall Width

0.952 inches maximum

Shaft Diameter

0.247 inches minimum and 0.250 inches maximum single actuator

Shaft Flat/Slot Angular Location

270.0 degrees from nonturn device single actuator

Shaft Length

1.688 inches nominal single actuator

Shaft Type

round, flatted single actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

10 single actuator

Switch Actuator Positioning Increment

36.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up nonsymmetrical

Terminal Type

tab, solder lug

Test Data Document

"81349-mil-s-3786/5 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a single mounting facility

Thread Length

0.375 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

76854

Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch

U.s./canadian manufacturers

42498

Dar Electronics Inc Dba National Radio Co

U.s./canadian manufacturers

71590

Crl Components Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-162-1838?

   The FSCG of the NSN 5930-00-162-1838 is 5930

2. Does the NSN 5930-00-162-1838 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-00-162-1838 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-162-1838 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-162-1838 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-162-1838 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Wed, Nov 3, 1971