NSN 271801F2

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.

28.0 dc at sea level contact voltage rating in volts, 115.0 ac at sea level contact voltage rating in volts, 225.0 milliamperes resistive load ac at sea level contact load current rating, breaks before makes each section rear contact switching action, 500.0 milliamperes resistive load and 50.0 milliamperes inductive load dc at sea level contact load current rating.

NSN 5930-00-005-3150 Datasheet

(NSN) National Stock Number

5930-00-005-3150

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-005-3150

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Wed, Jun 14, 1972

Schedule B Code

8536509020

Contact Voltage Rating In Volts

115 ac at sea level

Shaft Flat/slot Angular Location

330 degrees from nonturn device single actuator

Switch Actuator Indexing Position Quantity

2 single actuator

Contact Voltage Rating In Volts

28 dc at sea level

Mounting Method

Threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Pole Quantity

4 each section rear

Throw Quantity

2 each section rear

Switch Contact Basic Design

Nonpile-up symmetrical

Operating Temp Range

-65 / +85 degree celsius

Nonturn Device Type

Tab at 3:00 o'clock

Individual Section Quantity

2

Nonturn Device Radius

0.531 inches at 3:00 o'clock

Shaft Length

0.81 inches single actuator

Shaft Diameter

0.248 inches minimum single actuator and 0.251 inches maximum single actuator

Flat Height

0.216 inches minimum single actuator and 0.22 inches maximum single actuator

Thread Length

0.38 inches single mounting facility

First Flat Length

0.31 inches single actuator

Thread Class

2a single mounting facility

Overall Width

1.25 inches

Overall Height

1.313 inches

Overall Length

2.31 inches maximum

Style Designator

Circular wafer, bushing mount

Test Data Document

81349-mil-s-3786 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type

Shaft Type

Round, flatted single actuator

Switch Actuator Stop Device Type

Fixed stop single actuator

Switch Actuator Positioning Increment

30 degrees single actuator

Terminal Type

Tab, solder lug

Contact Switching Action

Breaks before makes each section rear

Contact Load Current Rating

225 milliamperes resistive load ac at sea level

Contact Load Current Rating

500 milliamperes resistive load dc at sea level and 50 milliamperes inductive load dc at sea level

Thread Series Designator

Unef single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

76854

Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch

U.s./canadian manufacturers

11237

Cts Corp of California Dba Cts Electronics Corp Paso Robles Div Electromechanical Group

U.s./canadian manufacturers

24631

Whittaker Corp Advanced Structures Div

U.s./canadian manufacturers

71313

Viking Technologies, Ltd.

U.s./canadian manufacturers

96238

Dne Technologies, Inc

U.s./canadian manufacturers

71590

Crl Components Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-005-3150?

   The FSCG of the NSN 5930-00-005-3150 is 5930

2. Does the NSN 5930-00-005-3150 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-005-3150 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-005-3150 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-005-3150 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-005-3150 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Wed, Jun 14, 1972