NSN 276540-A4

A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, and the like, shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes:resistor (1), variable, nonwire wound; nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.

28.0 dc at sea level contact voltage rating in volts, 200.0 milliamperes resistive load and 20.0 milliamperes inductive load dc at sea level contact load current rating, breaks before makes each section rear contact switching action, 100.0 milliamperes resistive load ac at sea level contact load current rating, 115.0 ac at sea level contact voltage rating in volts.

NSN 5930-00-007-9273 Datasheet

(NSN) National Stock Number

5930-00-007-9273

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-007-9273

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Fri, Jul 14, 1972

Schedule B Code

8536509020

Thread Series Designator

Unef single mounting facility

Style Designator

Circular wafer, bushing mount

Test Data Document

81349-mils3786 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type da

Contact Load Current Rating

200.0 milliamperes resistive load dc at sea level and 20.0 milliamperes inductive load dc at sea level

Contact Load Current Rating

100.0 milliamperes resistive load ac at sea level

Switch Actuator Stop Device Type

Fixed stop single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Shaft Type

Round, flatted single actuator

Terminal Type

Tab, solder lug

Contact Switching Action

Breaks before makes each section rear

Switch Actuator Indexing Position Quantity

10 single actuator

Shaft Flat/slot Angular Location

255.0 degrees from nonturn device single actuator

Contact Voltage Rating In Volts

28.0 dc at sea level

Contact Voltage Rating In Volts

115.0 ac at sea level

Throw Quantity

10 each section rear

Mounting Method

Threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Individual Section Quantity

4

Nonturn Device Type

Pin at 5:00 o'clock

Operating Temperature Range

-65.0 to 85.0 degrees Celsius

Switch Contact Basic Design

Nonpile-up symmetrical

Pole Quantity

1 each section rear

Nonturn Device Radius

0.375 inches at 5:00 o'clock

Overall Diameter

Up to 1.188 inches

Shaft Diameter

0.247 inches to 0.251 inches single actuator

Shaft Length

Up to 0.966 inches single actuator

Thread Length

0.344 inches to 0.391 inches single mounting facility

Overall Length

Up to 2.656 inches

First Flat Length

Up to 0.437 inches single actuator

Flat Height

0.211 inches to 0.221 inches single actuator

Thread Class

2a single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

76854

Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch

U.s./canadian manufacturers

57057

Navcom Defense Electronics, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-007-9273?

   The FSCG of the NSN 5930-00-007-9273 is 5930

2. Does the NSN 5930-00-007-9273 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-007-9273 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-007-9273 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-007-9273 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-007-9273 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, Jul 14, 1972

7. What is the thread length of nsn 5930-00-007-9273?

   0.344 inches to 0.391 inches single mounting facility

8. What is the thread length of nsn 5930-00-007-9273?

   0.344 inches to 0.391 inches single mounting facility

9. What is the thread length of nsn 5930-00-007-9273?

   0.344 inches to 0.391 inches single mounting facility